Network Technologies NTI PRIMUX PRIMUx-UZR - Manual (Page 2)

www.networktechinc.com
330.562.1999
Worldwide fax
[email protected] ©
All rights reserved
www
.networktechinc.com/kvmswitch-cat5.html
Control up to 64 servers in zero rack space
kvM swItCh vIa Cat5
Specifications
User station
Monitor
Female 15-pin HD connector.
A multiscan VGA monitor is required to display the different
video outputs from different platforms.
Maximum 1024x768 video resolution at 1,000 feet; higher
resolutions are supported at shorter distances (see page 17).
Supports Separate and Composite TTL level sync.
Supports the DDC2B protocol.
Devices
Two female USB Type A/two female 6-pin miniDIN
connectors.
Supports all standard PS/2 keyboards and most USB
keyboards with Windows or SUN keyboard layout.
Keyboards and mice are hot-pluggable.
NTI recommends using a USB SUN keyboard if there are
SUN hosts being controlled.
User keyboard and mouse must be of the same platform.
Supports standard 2-button PS/2 mice, as well as many other
styles.
USB SUN 3-button mice are supported.
Most USB mice (up to 3 buttons), including Microsoft USB
Intellimouse®.
Regulatory approvals
CE














host adapters
hosts
A maximum of 64 host computers can be daisy-chained
together. One platform-specific (PS/2, SUN or USB)
HA-x host adapter is required for each computer.
ha-Ps2
Compatible with any OS supporting PS/2, including
RS6000, SGI and HP 9000.
Male 15-pin HD/male 6-pin miniDIN connectors.
ha-sUN
Compatible with all legacy SUN computers,
including Ultras.
Male 15-pin HD/male 8-pin miniDIN connectors.
ha-UsB
Compatible with USB-enabled PC, SUN and MAC
computers.
Male 15-pin HD/male USB Type A connectors.
Power
Host adapter: power provided by the host computer.
User station: 110 or 220 VAC at 50 or 60 Hz via AC adapter
warranty
Two years.

•
•
•
•
•
•



P
R
IM
U
x
®
On screen Display (OsD)
Locate and select computers by name, comment, index or ID.
Use keyboard or mouse to operate the switch from menus
superimposed onto the monitor.
Displays the platform, name, and power status of the
daisy-chained computers.
Allows color skew compensation and video compensation
fine tuning for optimal video quality.
OS and software-independent.
security
Add or remove authorized users.
Set individual user names and passwords for each user.
Administrator can enable or disable all security features
and select which computers each user can access.





•
•
•
Front Panel Interface of the User station
Locally change ports with front panel buttons.
Provides eight “favorites” buttons allowing the user to
program buttons to select frequently used computers for
quick access.
keyboard
Use the keyboard to command the user station to select ports
or configure the Scan delay.
Scan or Command Modes are available from the keyboard.
Scan Mode automatically and sequentially displays the video
from each powered-on computer. Duration of display can be
2-255 seconds.
Command Mode allows the user to give instructions to the
switch through the keyboard. Keystrokes are not passed to
the computer.







Built-In Control Methods
Use CAT5, CAT5e or CAT6 UTP cable to daisy chain host
adapters and user station.
Use CAT5, CAT5e or CAT6 UTP straight through cable for
TIA/EIA-568B wiring terminated with standard
RJ45 connectors.
Cables not included.



Cables
User Station and Host Adapter Models
PRIMUX-UZR PS/2, SUN User Station 11x11x1.75
or USB
HA-PS2 PS/2 Host Adapter 2.1x3.7x1.0
HA-USB USB Host Adapter 2.1x3.7x1.0
HA-SUN SUN Host Adapter 2.1x3.7x1.0
NTI Part # Platform Function Size WxDxH (in)
2
2005-2007, NTI