Eizo ColorEdge CG210 - Manual (Page 5)

/
Wall Mount Arms
Mount your monitor on a wall and adjust the
screen’s position as necessary. The LA-030-W includes
three axes of movement, allowing it to be extended more
than 500 mm away from or placed against the wall
when not in use. The LA-030-W is available in gray or
black, and the LA-011-W in black. (Sold separately.)
/
Panel Protectors
To prevent dust and scratches,
EIZO offers the FP-901 and FP-702
protection sheets for the CG210 and
CG19 that fit right over the screen sur-
face and leave minimal trace of imple-
mentation. (Sold separately.)
Screen Cleaner Kit
Keep your screen free from dust and fingerprints
with this screen cleaner kit. Includes pump spray
and cloth. (Bundled with CG220 and CG210.)
GretagMacbeth
Eye-One Series Compatibility
ColorNavigator is compatible with the following GretagMacbeth
Eye-One products:.
Monitor Hood
EIZO’s monitor hoods not
only prevent ambient light from
reflecting off the screen, but include
added conveniences like a sliding
top cover and an interior made of
anti-glare material. A monitor hood is
bundled with the ColorEdge CG220 and
CG210, while the CH1-A hood (sold sepa-
rately) is available for the ColorEdge CG19.
Light shielding
angle from above –
CG220 and CG210: 23°
CG19: 24°
148 mm of
shielding for
sides and top.
The inside of the hood
is made with anti-glare
material.
Dual Height Adjustable Stand
The LS-HM1-D holds two moni-
tors of the same or different sizes
(excluding the CG220), provides
six-stage height adjustment from
0 – 75 mm, supports portrait mode,
and offers cable housing in the back.
(Sold separately.)
A monitor hood cannot be affixed when
monitors are mounted on this stand.
Flexible Arm
Adjust tilt, swivel, and height for
best visibility when you’re seated or
standing, and when you won’t be
using the monitor for a while move
it completely out of the way. Offers three
axes of movement and is available in gray or black. (Sold separately.)
The measuring device can be
attached to the monitor and
removed with the hood in place
via a sliding top cover.
The Eye-One measuring devices require a USB connection.
Eye-One Monitor
Eye-One Publish
Eye-One Photo
Eye-One Beamer
Eye-One Publish with DC
Eye-One Photo with DC
Eye-One Display / Eye-One Display 2
Eye-One Pro*
Eye-One Pro with i1 Match*
For more information on Eye-One products, visit www.i1color.com
* These models have been discontinued.
Accessories
LA-011-W
LA-030-W