Nokia WIRELESS LAN ADAPTER A040 - Manual (Page 5)

5
WARNING!
Do not use the Wireless LAN
Adapter when the use of a
wireless LAN terminal is
prohibited or when it may
cause interference or danger.
Use only the region setting
appropriate for the area where
the Wireless LAN Adapter is
used at the present time. Using
the Wireless LAN Adapter in
any other region or with an
incorrect region setting may
be illegal.
Use only accessories approved
by Nokia for use with this
particular Wireless LAN
Adapter. The use of any other
types may invalidate any
approval or warranty applying
to the Wireless LAN Adapter,
and may be dangerous.
For availability of approved
accessories, please check with
your dealer.
Install the Wireless LAN
Adapter close to an accessible
mains power outlet.
Avoid installing the Wireless
LAN Adapter near sources of
heat or in direct sunlight.
Disconnect the power before
relocating the unit. You can
only remove power to the
Wireless LAN Adapter by
physically removing the power
adapter from the main outlet,
or by removing the low
voltage power jack from the
rear of the unit.
Only use the power adapter
that is supplied with the unit,
or a manufacturer approved
replacement. Use of any other
adapter could be unsafe and
cause damage to the Wireless
LAN Adapter.
The Wireless LAN Adapter is
classified as an SELV (Safety
Extra Low Voltage) circuit
according to European
Standard EN 60950 (Safety of
information technology
equipment). For this
classification to be
maintained, equipment to
which the unit is connected
must also be classified as
SELV.
Do not connect telephone
equipment or wiring to the
LAN port. This socket is only
for use with RJ45 data
connectors and the ISO/IEC
8802-3 twisted-pair Ethernet
cabling system.