NEC NDV-27 - Manual (Page 18)

18
Initial Settings (continued)
DISPLAY
TV Aspect
4:3: Select when a standard 4:3 TV is connected.
16:9: Select when a 16:9 wide TV is connected.
Display Mode
Display Mode setting works only when the TV Aspect mode is set to
“4:3”.
LetterBox: Displays a wide picture with bands on the upper and lower
portions of the screen.
Panscan: Automatically displays the wide picture on the entire screen and
cuts off the portions that do not fit.
Progressive Scan
Progressive Scan Video provides the highest quality pictures with less
flickering. If you are using the Component Video jacks for connection to
a TV or monitor that is compatible with a progressive scan signal, set
Progressive Scan to On. Press ENTER to confirm your selection.
The confirm menu will appear.
Caution
If your TV does not accept the Progressive Scan format, the picture will
appear scrambled if you try Progressive Scan on the DVD Player.
If you set Progressive Scan to On in error, you must reset the unit.
1) Press B. Select “Off” using the v / V buttons.
The Setup menu appears.
2) Press STOP and hold it for five seconds before releasing it. The video
output will be restored to the standard setting and a picture will once
again be visible on a conventional analog TV or monitor. DVD
DVD
TV Aspect 4:3
Letterbox
Off
YPbPr
Display Mode
Progressive Scan
TV Output Select
DISPLAY
Move Select Exit