Nostalgia Electrics Retro RSM-602 - Manual (Page 5)

ENGLISH 4
USING YOUR RETRO SNOW CONE MACHINE™
First, find a stable surface near an electrical outlet to place your snow cone machine.
(Make sure your cord is away from any water source. If needed, it is acceptable to use an
extension cord.)
A. Before plugging in your unit, to add ice cubes, remove clear power control lid
from your RETRO SNOW CONE MACHINE™, by turning clockwise, lift and
remove.
B. Place ice cubes in the ice feed canister allowing
enough room for the clear power control lid to be
placed back on easily.
ILLUSTRATION B
Ice Feed Canister with ice
C. Plug in unit with lid in the OFF position.
D. Turn the clear power control lid counter clockwise, to the ON position. This will
activate the unit to begin shaving (To turn “OFF” shaving unit, simply turn the lid
clockwise.)
NOTE: “ON” / “OFF” is clearly marked on the clear power control lid with directional
arrows. See illustration C below.
ILLUSTRATION C
E.
Turn the clear power control lid clockwise
to turn off the unit and refill the ice feed unit
with ice. Repeat STEPS D and E until you
have shaved the amount of ice desired.
F. Use the shaved ice scoop to shovel shaved
ice from the collection chamber (accessible through the side door) to your cone
to create your favorite treats. We have included a few recipes on page 5 of this
manual to enhance the enjoyment of your snow cone machine or use your
imagination and create your own recipes.
ILLUSTRATION D
Showing designed use of cone shelf and
Plastic cone holders. (Paper cones not
Included)
Whatever you create, we are sure the RETRO SNOW CONE MACHINE™ will make it fun
for the whole family!