NEC 50XC10 - Manual (Page 18)

English
English-15
On-Screen Display (OSD)
Main Menu Sub Menu Sub Menu2 Explanation Default Reset
PICTURE PICTURE MEMORY Store picture menu settings and input terminal information. The
memory number is 1-6.
The "PICTURE MEMORY" screen appears when the SET button is
pressed on the "PICTURE MEMORY" MENU. OFF YES
CONTRAST Adjusts the image brightness in relationship to the white level.
Press + or - to adjust. 50 YES
BRIGHTNESS Adjusts the image brightness in relationship to the background.
Press + or - to adjust. 50 YES
SHARPNESS Adjusts the crispness of the image. Press + or - to adjust. 50 YES
COLOR Adjusts the color depth of the screen. Press + or - to adjust. 50 YES
TINT Adjusts the tint of the screen. Press + or - to adjust. 50 YES
NR Adjusts the amount of noise reduction. Press + or - to adjust. OFF YES
COLOR TEMP. Adjusts the color temperature of the entire screen. A low
color temperature will make the screen reddish. A high color
temperature will make the screen bluish. MIDDLE YES
WHITE BALANCE. GAIN RED The "WHITE BALANCE" appears when the SET button is pressed
on the "COLOR TEMP." OSD menu.
GAIN RED/GREEN/BLUE: Adjusts the white level of the white
balance. 50 YES
GAIN GREEN 50 YES
GAIN BLUE 50 YES
RESET Resets the factory default settings. Select "ON", then press the
SET button to reset. OFF YES
FILM MODE Selects Film mode. ON YES
PICTURE MODE Selects picture mode, [BRIGHT], [STANDARD], [CINEMA1],
[CINEMA2], [DEFAULT].
STANDARD: For watching in a bright room.
CINEMA1, 2: For watching in a dark room, especially good for
movies.
BRIGHT: Brighter picture than STANDARD.
DEFAULT: Restores factory default settings. STANDARD YES
GAMMA
Available only when
the Advanced OSD
function in the
FUNCTION menu is
enabled. Select a display gamma for best picture quality.
2.1, 2.2, 2.3, 2.4: The picture becomes darker as the number
increases.
S: Special gamma for certain types of movies. Raises the dark
parts and lowers the light parts of the image. (S-Curve)
These values are approximate. 2.2 YES
SET UP LEVEL
Available only when
the Advanced OSD
function in the
FUNCTION menu is
enabled. Adjusts the video black level.
VIDEO signal input only. 0% YES
COLOR CONTROL
Available only when
the Advanced OSD
function in the
FUNCTION menu is
enabled. RED Adjusts the levels of the Red, Green, Blue, Yellow, Magenta and
Cyan.
VIDEO and DVD/HD 1/2 input only. 50 YES
GREEN 50 YES
BLUE 50 YES
YELLOW 50 YES
MAGENTA 50 YES
CYAN 50 YES
RESET Resets the factory default settings. Select "ON", then press the
SET button to reset. OFF YES