Optional 500 sheet cassette – NEC 1800 User Manual
Page 2
Use this instruction sheet for installing the optional NEC SuperScript 1800 500-sheet 2nd Cassette (Tray 3). The cassette can
hold 500 sheets of medium weight paper or 40 envelopes. Do not load transparencies or label sheets in the 500-sheet 2nd
Cassette. For a complete list of usable media sizes see Appendix B, in the
SuperScript 1800 User’s Guide
.
Installing the 500-sheet 2nd Cassette
Loading Paper in the 500-sheet 2nd Cassette
1.
Turn off the printer.
2.
Remove all cables
(A)
.
3.
Make sure there is plenty of room around and
above the printer to work. Remove the 500-sheet
2nd Cassette from its packaging.
4.
Put the 500-sheet 2nd Cassette unit next to the
printer.
5.
Carefully place the printer on the 500-sheet 2nd
Cassette unit as shown
(B)
.
6.
Reconnect all cables.
7.
Turn on the printer
(C)
.
8.
Make sure READY appears on the Operator Panel display.
9.
If you are using the Windows PostScript printer driver,
open the Properties window, view the Device Options
(Windows 95/98) or Device Settings (Windows NT 4.),
and make sure that the optional cassette (Tray 3) is
selected.
10. Confirm the installation by printing a printer
configuration page from the Operator Panel as described
in Chapter 5 of the
SuperScript 1800 User’s Guide
.
1.
Remove the tray from the 2nd Cassette unit
(A)
.
Take out the styrofoam packing.
2.
Make sure the lever on the left-front side of the
cassette tray is positioned into the hole at the end of
the slot
(B)
.
3.
Squeeze and adjust the Back Paper Guide to the
desired paper length
(C)
.
4.
Make sure the Envelope Guide is adjusted to its back
position
(D)
.
5.
Lift the tab on the top of Side Guide 1 and slide it to the
paper size indicated on the tray bottom
(E)
.
6.
Place the paper into the tray
print side down
.
7.
Move Side Guide 2 to fit lightly against the paper
stack
(F)
.
8.
Reinsert the tray into the 500-sheet 2nd Cassette unit.
To load envelopes please see the User’s Guide.
A
B
C
note:
The 500-sheet 2nd Cassette is
referred to as Tray 3 in the printer driver and
on the Operator Panel.
Envelope Guide
B
A
E
D
C
F
lever
NEC
S
UPER
S
CRIPT
1800
O
PTIONAL
500-
SHEET
2
ND
C
ASSETTE
— I
NSTRUCTIONS
P
ART
N
O
. 808-878305-011A