E–33
Setup
Page1
Page2
Page3
Page4
RGB
Video
S-Video
Auto
Auto
Auto
Signal Select
When this feature is turned on, the “No Input” message will
appear if there is no signal present.
This option turns on or off the volume bar when you adjust
the sound volume using VOL+/-(up and down) button.
On:
You can increase or decrease the sound vol-
ume with the volume bar on screen.
NOTE: If no adjustments are performed within 3 seconds,
the Volume bar will disappear.
Off:
You can increase or decrease the sound vol-
ume without having to use the volume bar.
This option is avaiable on the optional presentaion remote
control (PR51KIT) only. This option turns on or off the key-
stone bar when you adjust the keystone using KEYSTONE
+/- button on the optional presentation remote control.
On:
You can increase or decrease the level with
the keystone bar on screen.
Off:
You can increase or decrease the level with-
out having to use the keystone bar.
Clean Filter: This option turns on or off the “Please clean
the filters” message each time you turn on the projector if
the projector has been used in excess of 100 hours of use.
On:
The message to clean the filters will be dis-
played.
Off:
The message will not be displayed.
See page E-37 for cleaning the filters. After cleaning the fil-
ters, reset the filter usage back to zero. To reset the filter
usage, see page E-35.
