Philips SPA5210B - Manual (Page 3)

EN
NOTE: 1. Before you install the notebook SoundBar, ensure that a
working USB controller is listed in Windows Device Manager on
your computer. 2. Ensure that the notebook SoundBar is installed
properly before using. 3. Never unplug the USB connector while the
notebook SoundBar is playing sound.
System Requirements:
PC Mac
Windows ® 98SE, Windows ® ME,
Windows ® 2000, Windows ® XP,
or Windows ® Vista™
Mac OS9/OS ® X, or later
Certified USB controller Built-in USB connection
Installation:
Slide down the clip (Fig. 1). 1
Clip the notebook SoundBar on the top of the notebook screen 2
and gently tighten the screw on the back (Fig. 1).
Plug the USB plug into a USB port on the notebook (Fig. 2). 3
Open your multimedia application software, and then adjust the 4
volume (Fig. 3).
When you have finished using the SoundBar, exit the multimedia 5
application software.
Unplug the USB cable from the notebook and release gently the 6
screw to remove the SoundBar from the top of the screen.
Wrap the USB cable and plug around the SoundBar in the slot, and 7
then store the notebook SoundBar in the pouch (Fig. 4 & 5).