Polaroid TDB-3000AR - Manual (Page 22)

8
1. Press the POWER button on the front panel.
The POWER indicator will illuminate red, the DVD video player
turns on.
2. Press the OPEN/CLOSE button.
3. Place the disc on the disc tray.
Be sure the graphics side is up and playback side is faced
down.
4. Press ENTER/PLAY.
NOTICE
• A disc may be damaged if it is not correctly placed on the guides
in the disc tray, this may also cause the DVD video player to
malfunction.
• The menu screen will appear automatically or you may access the
menu screen by pressing the TITLE button.
• Moving the DVD video player during playback may cause damage
to the disc as well as the player.
• To open and close the disc tray, you may only use the
OPEN/CLOSE button on the remote control or DVD video player.
This will open the disc tray.
Playing Back a Disc
BASIC PLAYBACK
How to playback DVD video discs
• Turn on the TV and choose the video input source which is
connected to the DVD video player.
How to enjoy the sound from the audio system
• Turn on the audio system and choose the input source which
is connected to the DVD video player.
Progressive Scan
WHAT IS PROGRESSIVE SCAN?
With the introduction of Digital/High-Definition TV, televisions can scan viewable information at double the frequency of standard NTSC
televisions. This provides for greater picture clarity and detail. This player provides the delivery of images to these newer televisions with
greater detail and film like quality. Connect the player to your HDTV ready television using the component video inputs/outputs.
HOW TO SETUP THE VIDEO SCAN MODE?
Connect this Player with Y, Pr and Pb, if your TV has Progressive Scan & Component Video inputs commonly found on HDTV sets.
Press I/P button on remote control unit to switch between Interlace & Progressive Scan mode.
FOR A HIGHER QUALITY PICTURE
DVD discs produce a high resolution picture. This may cause
some picture artifacts on the TV during playback. The artifacts
will vary depending on the TV used with the DVD video player.
To control picture artifacts reduce the sharpness setting on
your TV when viewing DVD discs.
ABOUT DVD CD
DVD CD icons will appear depending on the disc being played
back.
DVD: DVD video discs
CD: Audio CDs
HOW TO START PLAYBACK FROM THE MENU SCREEN
1. Press
buttons to select the title.
2. Press the ENTER/PLAY button.
You may also directly press the number button to select the
title.
The DVD video player will start playback from the title
selected.
HOW TO PAUSE PLAYBACK AND PLAY FRAME BY
FRAME (STILL PLAYBACK)
Press the PAUSE button once during playback,then press
the ENTER/PLAY button to resume normal playback.
Press the STEP button during playback, the picture will
advance one frame each time, then press ENTER/PLAY
button to resume normal playback.
During the still playback the sound is muted. Some discs do
not have frame by frame feature.
It is forbidden by law to copy, broadcast, show, play in public, and rent copyrighted material without permission.
DVD video discs are copy protected, and any recordings made from these discs will be distorted.
This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights
owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation,
and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly
is prohibited.
Manufactured under license from Dolby Labs. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. Confidential unpublished works.
1992-1997 Dolby Laboratories, Inc. All rights reserved. c