Pure Acoustics Contour 100Di - Manual (Page 10)

8
Using the alarms
Contour 100Di has two alarms which you can set to sound a tone, tune to a radio station or play
an track from your iPod/iPhone.
Setting an alarm
Press the Alarm button on the remote to show the status of
Alarm 1, press again to show the status of Alarm 2.
Press the Select button to choose and adjust either alarm and
press or and Select to adjust the following settings:
Alarm on/off
Press or to choose between ‘ON’ (alarm sounds) or ‘OFF’
(alarm does not sound) and press Select.
Time
Set the alarm time. Press or to adjust the hours then press
Select. Repeat to set the minutes then press Select.
Days
Set the days that the alarm sounds. Press or to choose
between: DAILY (every day), ONCE (no repeat), WEEKENDS or
WEEKDAYS (Monday to Friday) then press Select.
Type
Press or to choose between: DIGITAL, FM IPOD or TONE
(buzzer).
Station
If you’ve set alarm mode as DIGITAL or FM, press or to
choose between: LAST USED (Last station tuned to) or select a
favourite if you have any saved.
Volume
Press or to change the alarm volume then press Select.
You see the message ‘SAVED’ once you have completed all the
alarm settings.
The
1
and
2
icons on the screen indicate when an alarm is
set.
DR
DR
DAILY
DR
DAB
DR
LAST
DR
DR
DR
ON
SAVED
DR 1