Philips ShowView E9015ED - Manual (Page 10)

10
English
Setting Up your System
Setting the clock
If the display shows an incorrect time or ' --:-- ', the time and
date must be reset manually.
If a TV channel that transmits TXT/PDC (teletext/PDC) is
stored under programme number 'P01', time/date will automat-
ically be taken from the TXT/PDC information. (SMART
CLOCK)
1 Press VCR, then DISC/VCR MENU.
2 Press K/L to select 'INITIAL SET UP' , then press B.
3 Press K/L to select 'CLOCK' , then press B.
4 Check the time in 'TIME'. If
required, please change the time
with numerical key pads.
5 Check 'DAY', 'MONTH' and 'YEAR'
in the same way.
6 Choose ‘SMART CLOCK’ ON or
OFF with B.
7 To end, press
DISPLAY/STATUS/EXIT.
TIME --:--
DATE --/--/--
SMART CLOCK [ON]
END=EXIT
Setting the RF out channel (for VCR fea-
tures)
In some reception locations it is possible that a TV channel will
be sent on the same or similar frequency as the System.
Result: As soon as the System is switched on, the reception
quality for this or several other TV channels will decrease.
The following steps will show you how to change the pre-set
'transmission' (RF out channel) frequency on the System.
1 Press VCR, then DISC/VCR MENU.
2 Press K/L to select 'INITIAL SET UP' , then press B.
3 Press K/L to select 'RF OUT' , then press B.
4 Press B.
5 Press K/L or numerical key pads to select a free (not allocat-
ed) channel between channel 22 and 69 in your area.
6 Press B.
7 To end, press
DISPLAY/STATUS/EXIT.
SELECT K L CHOOSE B
→RF OUT CH 36
END=EXIT
What is RF out channel?
This electronic component in the System allows the device to
transmit audio and video signals via the aerial cable.These signals
can be received on a TV set just like TV channels.
What is RF out channel frequency?
This frequency or channel indicates the channel on which the
audio or video signal is transmitted.
If you cannot get an interference-free picture and sound, switch
the built-in modulator off.
Press L repeatedly until "--" appears next to "RF OUT CH" on
the TV screen.
Then confirm with B. In that case, please connect your VCR to
your TV with a Scart cable.
5 Press K/L to select 'MANUAL
TUNING'.Then press B.
6 Press K/L to select 'DECODER'.
7 Press B to select 'ON' (Decoder
switched on).
8 To end, press DISPLAY/STATUS/EXIT.
The decoder has now been allocated to this TV channel.
How can I switch off the decoder?
Use B to select 'OFF' (Decoder switched off).
MANUAL TUNING
PROG. P55
CHANNEL 055
→DECODER [OFF]
SKIP [OFF]
SELECT K L CHOOSE B
END=EXIT
Decoder allocation (for VCR features)
Some TV channels transmit encoded TV signals which can only
be viewed with a purchased or rented decoder.You can con-
nect such a decoder to this System.The following function will
automatically activate the connected decoder for the desired
TV channel.
1 Switch the TV on. If applicable, select the programme number
for the System operation.
2 Press K/L or numerical key pads to select the TV channel
which you would like to allocate the decoder to.
3 Press DISC/VCR MENU.The main menu will appear.
4 Press K/L to select 'TUNER SET UP'.Then press B.
Sorting and clearing TV channels manually
After you have performed the automatic channel search you
may not agree with the sequence in which the individual TV
channels have been allocated to the programme positions (pro-
gramme numbers) of the System.You can use this function to
individually sort the TV channels already saved or to delete
unwanted TV channels or those with poor reception.
1 Press VCR, then DISC/VCR MENU.
2 Press K/L to select 'TUNER SET
UP' , then press B.
3 Press K/L to select 'MOVE' , then
press B.
4 Press K/L to select the saved TV
channel that you want to change.
5 Confirm with B.
6 Move the selected channel with K/L to the programme num-
ber you want to assign.
7 Confirm with B.
8 To assign other TV channels to a programme number, repeat
steps 4 to 7.
9 Confirm the assignment of the TV channel with MOVE menu.
10 To exit the MOVE menu, press DISPLAY/STATUS/EXIT.
The clock resets automatically
If you save a TV channel that transmits TXT/PDC on programme
number ‘P01’, date and time will constantly be updated. As a result,
time changes, i.e. daylight savings time, will be set automatically.
MOVE
→P01: 02 P06: 90
P02: 03 P07: 99
P03: 05 P08: 121
P04: 10 P09: 124
P05: 74 P10: 130
SELECT K L CHOOSE B
END=EXIT
Setting the language (for VCR features)
You have the option of setting one of the displayed languages
for the on-screen menu (OSD). However, the System display
will only display English text regardless of this setting.
1 Press VCR, then DISC/VCR MENU.
2 Press K/L to select 'INITIAL SET
UP' , then press B.
3 Press K/L to select 'LANGUAGE',
then press B.
4 Select the desired language with
K /L.
5 To end, press
DISPLAY/STATUS/EXIT.
SELECT K L
→ ENGLISH
FRANÇAIS
ESPAÑOL
DEUTSCH
ITALIANO
SVENSKA
NEDERLANDS
END=EXIT
E9015ED_EN.qx3 03.7.29 6:32 PM Page 10