Planet Technology VIP-254 - Manual (Page 11)

10
Voice communication samples
There are several ways to make calls to desired destination in IP Phone. In this
section, we’ll lead you step by step to establish your first voice communication via
keypad and web browsers operations.
Peer to peer (P2P) mode
STEP 1: Assuming there are two VIP-254T in the network the IP address are
192.168.0.1 and 192.168.0.2
VIP-254 VIP-254
VIP-254T-A
LAN IP Address
(192.168.0.1)
VIP-254T-B
LAN IP Address
(192.168.0.2)
STEP 2: Pick up handset or press “Hand Free” key from keypad of VIP-254T-A and
dial “192.168.0.2#”. Then the phone of VIP-254T-B should ring. You can
do the same thing to the VIP-254T-B.
Hint
• If the IP address of the remote calling party is known, you may
directly make calls by preset number via its IP address and end
with an “#”.
• If the IP phones are installed behind a NAT/firewall/ IP sharing
device, please make sure the NAT device support SIP applications
before making calls
SIP Proxy mode
VIP-254 VIP-254
VIP-254T-A
LAN IP Address
(192.168.0.1)
VIP-254T-B
LAN IP Address
(192.168.0.2)
SIP-50
SIP-50
WAN IP Address
(192.168.0.50)
Number: 100 Number: 200