Proxim Tsunami MP.11 - Manual (Page 11)

Tsunami MP.11 Antenna Installation
Copyright © 2006 Proxim Wireless Corporation. All rights reserved. 11
Model 2454-R and Model 5054-R Hardware
The following types of hardware devices are used for setting up a wireless link:
• Base Station Unit (BSU)
• Subscriber
Unit (SU)
There are two models of the 5054-R and 2454-R Subscriber Unit—one with an integrated antenna, another
similar in appearance to the Base Station Unit, also with an external antenna connection, as shown in the
following illustration.
SU with Integrated Antenna BSU / SU with External
Antenna Connection
Models 2454-R and 5054-R Cable Setup for the Outdoor Antenna
The following is an overview of the cable setup for the outdoor antenna. If the radio is mounted close to the surge
arrestor, it can be connected directly to the surge arrestor.
Ethernet cable CONNECTS TO Surge Arrestor CONNECTS TO Ethernet Cable at ingress point
CONNECTS TO 5054-R/2454-R external connector.