Pioneer SL400I - Manual (Page 22)

22 ENGLISH
Chapter 5 - Basic navigation
> This is the basic way of navigating through all the menus.
1
Press INTERNET or PC LINK on the
remote control.
2 The available media sources and
services will appear on the TV screen.
3 The little yellow arrows around the
highlighted bar indicate which arrow
buttons you can press to navigate
through the menus on the television
screen.
4
Press
3 or 4 to make a selection.
Next, press 2 or OK to confirm.
5 If color coded user options appear on
the TV screen, press the matching color
button to use that option.
Option: If menu choices are displayed in the lower left and lower right corner of the LCD, use the buttons on the SL400i on either side of the LCD to enter your choice.
The left button corresponds to the red button on the remote control, the right button corresponds to the green button.You may also use the remote
control color buttons instead of the buttons on either side of the SL400i LCD display.
To go back to a previous menu, press 1 .
– If you did not connect the SL400i to a TV (e.g. to an audio system only) or if the TV is off,
observe the LCD display on the SL400i. It gives you the same information, and navigating
the menus still works in the same way.
– After a set time, a screen saver will become active to prevent images being burnt into the
TV screen.