Philips SDV6122/27 - Manual (Page 6)

6
3
Connect the DC plug to the antenna and
the power supply to a 120V AC outlet.
4 Set up SDV6122
For VHF/FM reception
1
Extend the telescopic dipoles to the
longest possible length.
2
To turn the amplifier up, rotate the gain
control knob towards the max position.
12V DC 100mA
OUTPUT
3 Get started
To ensure the antenna to work properly, read
the user manual of your television before you
start. Set the television so that it receives the
signal from an ANTENNA instead of CABLE or
SATELLITE.
Installation
Determine the signal strength
Before Installation, determine the best
location for optimum reception. It is important
for the antenna to have an unobstructed path
to the transmitter. For best results, ensure the
antenna faces the location of the transmitter.
Note
Choose a location near a window which gives the •
antenna a clear view of the transmitter.
Note
Place the antenna away from the metal surface to
•
avoid interference.
Connect to the TV
1
Connect one end of your coaxial cable to
the signal output of the antenna.
2
Connect the other end to the input on
the TV receiver.