719t tilt table mortiser, Y e a r – Powermatic PM2800 User Manual

Page 5

powermatic.com

719T TILT TABLE MORTISER

The 719T Tilt Table Mortiser features heavy-duty cast iron construction and a powerful 1HP

motor for the most demanding jobs. The head is mounted using adjustable gibs to assure

years of trouble-free service. The heavy rack and pinion gear system utilizes a spring-

loaded six position adjustable handle for movement. A handy depth stop gives a uniform

depth of mortise. A large 20-1/4" x 7" table gives plenty of work support and will adjust to

any angle between 0 and 35°. The table can also move left to right and forward and back

on dovetail ways with the large handwheel controls. Adjustable linear stops and fl ip down

stop allow for precision repeatability. The quick adjust clamp provides plenty of work-

holding force and will swivel to accommodate angled workpiece. The heavy enclosed

steel cabinet provides plenty of storage inside for chisels and accessories.

OPTIONAL ACCESSORIES

Chisel & bit 1/4"

6285526

Chisel & bit 5/16"

6285527

Chisel & bit 3/8"

6285528

Chisel & bit 1/2"

6285529

1/2" chuck with key

6294245

Drill bushing 1-1/8"

6294198

Drill adapter shaft

6294210

Drill bushing 3/4"

6294221

Drill bushing 5/8"

6294222

Chuck extension adapter

6294232

SPECIFICATIONS

Model Number

719T

Stock Number

1791264K

Spindle Speed (RPM)

1725

Table tilt (deg.)

0 to 35

Chisel Capacity (in.)

1/4 - 1

Chuck Capacity (in.)

1/2

Chisel Shank Capacity (in.)

5/8 I.D. / 3/4 I.D. / 1-1/8 I.D.

Chisel Stroke, Maximum (in.)

10-3/4

Head Stroke , Maximum (in)

Longitudinal table travel (in)

15-1/2

Cross table travel (in)

Chisel Center to Fence (in.)

Table Size (in.)

7 x 20-1/4

Fence Size (in.)

4-1/2 x 20-1/4

Base Size (in.)

14 x 16

Bushing Size (in.)

5/8, 3/4, 1-1/8

Overall Height on Base (in.)

Overall Dimensions (L x W x H/in.)

21-1/4 x 21-5/8 x 74

Motor (TEFC)

1HP, 1Ph, 115/230V, Prewired 115V

Net Weight (lbs.)

276

Shipping Weight (lbs.)

292

FEATURES

1HP TEFC motor

Work stop for repeat cuts

Depth and length stops

Enclosed stand with shelf

Drill bit adapter

Quick-release vise for speedy release of work material

Chuck extension adapter

Y E A R

WARRANTY

STANDARD EQUIPMENT

Chisel and tool holder with sharpening stone

1/2" drill chuck with 4" chuck key

Removeable safety switch key

08DrillingMortising

10/24/06, 8:01 AM