PYLE Audio PLCG53 - Manual (Page 4)

Page. 4
P / N : 570-931612-03
WIRE CONNECTION RESET FUNCTION
P / N : 570-931612-03
The RESET button is located on the front
of main panel. It is recessed in order to
prevent accidental engagement, and can
be activated with the tip of a ball-point
pen or any similar pointed object. This
reset circuitry is provided in order to
protect the unit's microprocessor, and
should only be activated under the
following conditions :
a) Initial installation after all wiring is
completed.
b) Abnormal operation is encountered
such as numerical indication on display
is erratic.
c) Whenever the reset button is
activated, all preset memory content will
be erased and must be reprogrammed.
UNIT REMOVAL
1. Remove Front Control Panel.
2. Slightly insert the key into the slot and
gently to release.
3. Separate the sleeve from the unit. Keep
release key in a safe place as you may
need for future removal of unit.
CAUTION : DO NOT GROUND ANY SPEAKER
WIRES TO CHASSIS (-).
INSTALLATION
WARNING!!
Due to protection of CD Mechanism,
two small screws on the top of the unit
must be released before operate the
unit. Otherwise, the CD Mechanism
can not be working properly.