Powerware X-Slot USB Module User Manual
Page 7
Installing the USB Module
7
X-Slot
Z USB Module User’s Guide
:
05146515 A Uncontrolled Copy
Installing the Software
After the USB module installation is complete, perform the following
steps to install the USB module drivers and software:
1. Insert the LanSafe III software CD into the CD-ROM drive.
2. Click
Next
when the “Add New Hardware Wizard” opens.
3. Select “Search for the best driver for your device” and click
Next
.
4. Select “Specify at location” and click
Browse
.
5. Navigate to one of the following CD directories:
CD Directory
Operating System
\LanSafe\NTand95\
LanSafe III for Windows 95/98/NT 3.5x-4.0 (English)
\LanSafe\NTand95j\
LanSafe III for Windows 95/98/NT 3.5x-4.0 (Japanese)
NOTE
FailSafe III is not compatible with the X-Slot USB module.
6. Click
OK
and
Next
.
7. When the “Windows driver file search for the device” prompt
appears, click
Next
.
8. Click
Finish
.
9. When the setup screen for the LanSafe III software opens,
install the software according to the onscreen instructions.