Philips VR158 - Manual (Page 5)

EN
Connecting without a scart cable
Have the following cables ready:
an aerial cable.
1. 1. Switch off your TV.
2. 2. Remove the aerial
cable plug from the
aerial input socket of
the TV. Insert it into
the AERIAL at the
back of the video
recorder.
3. 3. Insert one end of the
supplied aerial cable
into the RF OUT at
the back of the video recorder and the other
end into the aerial input socket at the back of
the TV.
4. 4. Insert AC cable into the wall socket.
5. 5. Switch on your TV and select the programme
number used for video playback on your TV
set (see your TV's operating instructions).
6. 6. Select this programme number and manually
start the TV's channel search as if you want-
ed to save a new TV channel until the next
screen appears.
7. 7.Save this programme number setting on your TV
for video recorder operation.
You can find more details in chapter 'Preparation
for use'.
AERIAL
R F O U T
TV
A E R I A L
RF OUT
R F O U T
TV
A E R I A L
5
I do not see a Language setting picture
* Check the cable connections.
* Repeat the channel search on your TV.
Programme number for video recorder opera-
tion
You have now saved a programme number for use
by your video recorder as you would a regular TV
channel. This programme number must now be
used in future for video recorder playback ('video
recorder' TV channel).
PUSH MENU TO CONTINUE
HE273ED(EN).QX3 03.3.12 1:47 PM Page 5