Polaroid FLM-2017 - Manual (Page 17)

- 16 -
directly .
* X is the channel number.
TV Setup and Operation
Preparations
1. After making all connections, press the POWER button to turn on the power. (If it is turned on, the
power indicator is blue.)
2. Press the SOURCE button to shift to TV mode. You can go on with the following operations:
Image Setting
Note: This item is only available when there is signal input.
Press the MENU button once to enter the setup
menu, as shown on the right:
In the setup menu, press the ▲▼ button to select
Image and then press the ENTER button to enter
the item. Press the ▲▼ button to select. Press the
MENU button to return to the previous menu.
Scheme Setup
Press the ▲▼ button to select Scheme and press
the ENTER button to enter. Press the ▲▼button
to select the desired item and press the ENTER
button to confirm your selection. Press the MENU
button to return to the previous menu.
Brightness Setup
Press the ▲▼ button to select
Brightness and press the
◄► button to adjust the
value. Press the MENU button
to return to the previous menu.