Patton electronic SL4050/10 - Manual (Page 63)

Dialing from the Phone Book 63
SmartLink 4050 Series Getting Started Guide 5 • Using the Phone Book
Dialing from the Phone Book
1. Press the PHONE BOOK button to access the phone book.
2. Press the down button to scroll down the list until the desired name is displayed on the screen.
3. Press OK to dial.
Storing a number
1. Press and hold the PHONE BOOK button until Name displays on the screen.
2. Use the numeric keypad to type a name, then press OK
Note To type text characters, press the appropriate key on the numeric keypad (see
figure 1 on page 17). For example, to type a “z” press the 9 key until the low-
ercase z appears—the displayed sequence would be:
9 W X Y Z w x y z.
3. Use the numeric keypad to type the number that corresponds to the name, then press OK
4. Press OK again to save the changes to the Phone Book.
5. Repeat steps 1 through 4 to store additional phone numbers.
Editing a Phone Book listing
1. Press the PHONE BOOK button to access the phone book.
2. Press the down button to scroll down the list until the desired name is displayed on the screen.
3. Press the PHONE BOOK button again.
4. Select Edit and press OK to begin editing.
5. Use the numeric keypad to type a new name, then press OK
Note To type text characters, press the appropriate key on the numeric keypad (see
figure 1 on page 17). For example, to type a “z” press the 9 key until the low-
ercase z appears—the displayed sequence would be:
9 W X Y Z w x y z.
6. Use the numeric keypad to type the new number that corresponds to the name, then press OK
7. Press OK to save changes, overwriting the previous name and phone number.