Philips SOUNDMACHINE AZ1845 - Manual (Page 7)

Selecting a different track
• Press
∞/ § once or repeatedly until the
desired track number appears in the display.
For MP3/WMA-CD: First press ALB +/-
once or more to select your album.
• In the pause/stop position, press 2; to start
playback.
Finding a passage within a
track
1 During playback, press and hold ∞ or §.
➜ The CD is played at high speed and with
reduced volume.
2 When you recognize the passage you want,
release
∞ or § to resume normal playback.
Helpful hints:
– When your searching reaches the end of the
last track, the CD goes to stop mode.
Programming track
numbers
You may store up to 40 tracks in the desired
sequence. If you like, store any track more
than once.
1 In the stop position, press PROG to
activate programming.
➜ Display: PROG and P01 flash. (See 4)
2 Press ∞ or § to select your desired track
number.
For MP3/WMA-CD: first press ALB +/-
once or more to select your album.
3 Press PROG to store the desired track
number.
➜ Display: PROG and P02 flash for you
to program the next track.
4 Repeat steps 2 to 3 to select and store all
desired tracks in this way.
➜ If you attempt to store more than 40
tracks, no track can be selected and the
display shows
F FU UL L .
5 To play your program, press 2/;.
Helpful hints :
– When playback of your program comes
to the stop position, your set will return
to normal playback.To re-enter program
mode, press PROG in the stop position.
Reviewing the program
In the stop position, press PROG to see the
total number of stored tracks.
Erasing a program
You can erase the contents of the memory
by:
– pressing 9 twice.
– selecting USB , FM , MW or OFF;
– opening the CD door;
Different play modes:
REPEAT and SHUFFLE
(See 5
,
6)
You can select and change the various play
modes before or during playback, and
combine REPEAT modes with PROG (PRO-
GRAM).
– plays the current track continuously.
For MP3:
ALB –plays all tracks of current album
repeatedly.
– repeats the entire CD/program.
– plays all tracks in random order.
– plays all tracks repeatedly in
random order.
1 To select play mode, press MODE once or
more.
➜ The display shows the related icon.
2 Press 2; to start playback if in the stop/pause
position.
➜
Playback will automtically start if you select
SHUFFLE mode
.
3 To return to normal playback, press MODE
repeatedly until the modes are no longer
displayed.
– You can also press
9 to cancel your play
mode.
MP3/WMA/ CD Player
ifu_az1845_eng 2009.7.17 14:41 Page 7