Powerware 6000 User Manual
Page 38

Installation
30
Powerware
®
9 Prestige Series User’s Guide (4500/6000 VA)
S
Rev H
www.powerware.com
PPU
Battery
Cabinets
Air Vents
Battery Cabinets
PPU
Figure 7. Cabinet Setup
NOTE You can install additional battery cabinets while the UPS is operating, but
confirm the UPS is not in Battery mode (see page 51).
2. Verify the input breaker on the PPU rear panel is in the
OFF (O) position (see Figure 8).
3. Verify the circuit breaker on all battery cabinets is in the
OFF (O) position.
This manual is related to the following products: