Setting the clock radio – Philips XP AJ 3430 User Manual
Page 8
8
English
The time is displayed using the 12 hour clock with
PM indicator (PM off = AM).
1. Turn the SET control to TIME.
2. Press
7 repeatedly or hold down on the button to adjust the
hours.
Release
7 when you reach the correct hour.
3. Press
8 repeatedly or hold down on the button to adjust the
minutes.
Release
8 when you reach the correct minute setting.
4. Turn the SET control to CLOCK.
RADIO
1. Press SLEEP/ RADIO ON once to switch on the radio.
™ Display shows the radio frequency of the last selected
waveband briefly before returning to the clock time. Your
preset station is also shown if you are listening to a
preset.
2. Press BAND if you wish to change waveband.
3. Adjust the sound using VOLUME.
4. Press ALARM RESET/ RADIO OFF to switch off.
TUNING TO RADIO STATIONS
Automatic tuning
• Press
7 or 8 one second or more to tune to your station.
™ The radio automatically tunes to a station of sufficient
reception.
Manual tuning
• Press
7 or 8 briefly and repeatedly until you reach the
desired frequency.
To improve reception:
FM:
Adjust the position of the power cord (built-in
antenna) for optimum reception.
AM:
Uses a built-in antenna inside the set. Direct the
antenna by adjusting the position of your set.
STORING AND USING PRESET STATIONS
You can store up to a total of 10 radio stations in the memory,
5 on each waveband.
1. Tune to your desired station (see TUNING TO RADIO STATIONS).
2. To store a preset, hold down briefly on a PRESET button 1-5
until you hear a double beep.
™ Display shows the preset number of your station.
3. Repeat steps 1 and 2 to store your other stations.
• You can overwrite a preset station by storing another
frequency in its place.
4. Press a PRESET button 1-5 to listen to a preset station.
SETTING THE CLOCK
RADIO
XP AJ 3430/17 08-05-2000 15:29 Pagina 8