PYLE Audio PLTV165 - Manual (Page 10)

Fig.3
10
OPERATION
SWITCHING ON/OFF THE UNIT
Switch on the unit by pressing POWER
button (1) on the front panel or POWER
button (17) on the remote control. When
system is on, press it again to turn the
unit off.
OPEN/CLOSE THE MONITOR AND
ANGLE ADJUSTMENT
Press OPEN/CLOSE button (2) on the
front panel or point the remote control
to IR (3) on the front panel and press
OPEN/CLOSE button (18), the
monitor will stretch automatically.
OPEN/CLOSE button
When the monitor stretches to a certain
location, it will turn upward
automatically and stop at vertical
position.
Fig.1
Adjusting the viewing angle.
When the monitor doesn't move, you
can press ANGLE+ button (21) or
ANGLE button (22) on the remote
control to turn the monitor upward or
downward at fine steps to get a
desired viewing angle. And you can
rotate the monitor left and right from
the central viewing position at a
certain angle range manually.
Don't rotate the monitor forcibly to
avoid mechanical damage.
Fig.2
Return the monitor to the central
viewing position, then press
OPEN/CLOSE button (2) on the
front panel or press OPEN/CLOSE
button (18) on the remote control,
the monitor will turn downward
automatically.
Fig.4
When the monitor turns downward to a
certain angle, it will draw in.
Fig.5
REMOTE SENSOR
There is a remote sensor IR (3) on the
front panel. On the monitor, there is
another remote sensor IR (13) to receive
remote control signal. You can point the
remote control handset to IR (3) (when
the monitor doesn't stretch out) or IR (13)
(when the monitor stretches out) and
press function keys on the remote control
to control the TV unit.
The unit is also connected to an external
remote receiver (See the electrical
connection diagrams on Page 7), and the
function is the same with IR (3) and (13).