Philips SWV6813 - Manual (Page 3)

SWV6813
3-In 1-Out Auto Detecting
HDMI Switcher
The switcher allows you to easily share
a single HDMI display or a HDMI-com-
patible TV with three HDMI devices.
Features
• Supports 480i, 480p, 720p, 1080i
and 1080p screen resolutions.
• Extends HDMI signal for a longer
transmission.
• Supports HDCP compliant devices.
• Easy to install and simple to operate
Installation
1. Use an HDMI cable to
connect the HDMI
sources to the 3-In 1-
Out HDMI switcher
inputs on the rear
panel.
2. Connect the cable from
your HDMI display to
the switcher output.
3. Plug the supplied 5V DC adaptor
into the switcher DC input. The LED
power indicator lights green.
4. The default input is INPUT1 and
default mode is AUTO.
5. When switcher detects which input is
ON, it automatically selects that
input. If all inputs are connected into
switcher and turned on, the last
selection is based on the principle of
priority, INPUT1>INPUT2>INPUT3.
The LED input and mode indicator
lights red to show which input is
working.
3