Philips 4404 User Manual
Page 10
6.
4
Brush the inside of housing and Razor Head Assembly.
5
Replace the Razor Head Assembly back on razor.
Every Two Months: Razor Heads
1
Turn razor OFF and disconnect from outlet.
2
Remove Razor Head Assembly off housing unit.
3
Brush the inside of the housing.
4
Turn Razor Head Assembly over so that the
underside is exposed.
5
Press down and turn wheel of frame counterclockwise.
6
Remove the frame and brush clean.
7
Remove and clean one cutter and head at a time.
•
Be careful not to mix up cutters and heads.They
are a matched set and if interchanged, it will greatly
affect shaving performance.