Philips 14PT6441 - Manual (Page 11)

C
OMPONENT
V
IDEO
(CVI) I
NPUT
C
ONNECTIONS
C omponent Video inputs provide for the
highest possible color and picture resolu-
tion in the playback of digital signal source
material, such as with DVD players. The
color difference signals (Pb, Pr) and the
luminance (Y) signal are connected and
received separately, which allows for
improved color bandwidth information (not
possible when using composite video or S-
Video connections).
1 Connect the Component (Y, Pb,
Pr) Video OUT jacks from the
DVD player (or similar device) to the
(Y, Pb, Pr) in(put) jack on the TV.
When using the Component Video
Inputs, it is best not to connect a
signal to the AV in Video Jack.
2 Connect the red and white
AUDIO CABLES to the Audio
(left and right) output jacks on the
rear of the accessory device to the
Audio (L and R) AV In Input Jacks
on the TV.
3 Turn the TV and the DVD (or
digital accessory device) ON.
4 Press the AV button or the
CH + or CH – buttons to scroll
the available channels until CVI
appears in the upper left corner of
the TV screen.
5 Insert a DVD disc into the DVD
player and press the PLAY
ᮣ
button on the DVD Player.
The description for the component video con-
nectors may differ depending on the DVD player
or accessory digital source equipment used (for
example, Y, Pb, Pr; Y, B-Y, R-Y; Y, Cr, Cb).
Although abbreviations and terms may vary, the
letters b and r stand for the blue and red color
component signal connectors, and Y indicates
the luminance signal. Refer to your DVD or dig-
ital accessory owner’s manual for definitions and
connection details.
H ELPFUL H INT
L
VIDEO
S-VIDEO
CVI
Y
Pb
Pr
AUDIO
AV In
R