Planar LB2650W - Manual (Page 14)

14 LB2650W User’s Guide
(020-0973-00 Rev. A)
Only)
Color
Temperature
Choose different color temperature
(9300K, 7500K, sRGB, USER).
Default is USER.
USER mode adjustable.
Adjust the contrast and brightness of each color of the
white balance.
RED
GREEN
BLUE
GAIN
Allows you to adjust the Red/Green/Blue color gain.
RED
GREEN
BLUE
OFFSET
Allows you to adjust the Red/Green/Blue color offset.
SATURATION
Adjust color depth, increasing this value makes pictures
more colorful, decreasing makes pictures less colorful.
Adjustable value from -100 to 100.
Factory setting: 0
DDC/CI
DDC/CI allows you to control certain settings of the
monitor via computer.
Default is ON.
SIDE COLOR
When "Full" is not selected in the "Expansion Mode"
and the resolution is under the LCD panel's native
resolution, the picture does not display at full screen.
The borders/sides around the picture can be
customized.
Adjust "Side Color" to customize the color of the
border/sides around the picture.
RECALL
Reset all user settings to factory preset value except
language selection.
LANGUAGE Select a language for OSD menu.
OSD
LEFT/RIGHT Control the location of the OSD menu on the screen.
Factory setting: Center of the screen.
OSD UP/DOWN
OSD TURN OFF
Select OSD Menu turn off time.
Factory setting: 45 seconds.