Philips AZ 7582 - Manual (Page 14)

OPERATION
14
Press the ESA button to switch on/off ESA.
y y The ESA symbol lights up in the display.
y y The ESA memory continuously stores in advance the CD
data to be played. This is to prevent sound skipping
during play due to shock and vibration.
y y Prolonged shocks and vibrations may empty the ESA
memory completely and CD play will be interrupted.
Note: When switching the ESA feature on and off, CD play will be delayed or
interrupted for a short time.
RESUME – playing from where you have stopped
1 Activate the RESUME feature by sliding the RESUME/HOLD
switch to the center setting.
2 If you stop CD play by pressing the STOP
9 button, the last
position played will be stored.
3 Press
2; to resume CD play from the position it was
stopped at.
HOLD – deactivating all buttons
Activate the HOLD feature by sliding the RESUME/HOLD switch to the far right.
y y Now all buttons are locked until you switch the feature off again. If you press a
button (except OPEN), the display will indicate HOLD.
Note: - In the HOLD position, the RESUME function is automatically activated.
- Opening the lid erases the information about the last position played.
PR O G
RESUME / HOLD
ESA – Electronic Shock Absorption Memory
English