Philips HP6326PB User Manual
Page 8
10.
11.
B Body of Razor and Shaving Head, including Shaving Foil,
may also be rinsed under running water to remove hairs
(Fig. 12 & 13).
3
Be sure all parts are dry before reassembling.
B Do not use cloth or towel to dry Shaving Foil or cutter
block; allow to air dry.
4
Replace Shaving Head by gently pressing back into
position on Razor body.
B Hold Razor Head by plastic housing only.
NOTE: Use cold or lukewarm water. Never use cleaners
such as alcohol or nail polish remover.
ASSISTANCE
B For assistance or the Authorized Norelco Service
Location nearest you, call toll free:
1-800-243-7884
or visit our Philips website: www.philips.com
B Authorized Norelco Service Location information is
available 24 hours a day, 7 days a week.
IMPORTANT BATTERY DISPOSAL INFORMATION
B When discarding your razor:
THIS PHILIPS RAZOR CONTAINS A NICKEL-
CADMIUM RECHARGEABLE BATTERY WHICH MUST
BE RECYCLED OR DISPOSED OF PROPERLY.
Refer to enclosed instruction sheet for directions on
removing rechargeable battery.
CAUTION:
B Battery should be removed only when razor is to
be discarded.
B Remove Razor from Charging Base and unplug Charging
Base from outlet before dismantling.
B All servicing should be performed by an Authorized
Norelco Service Location only.