Printek 850 Series - Manual (Page 102)

S P E C I F I C A T I O N S
9 4
Rear feed or optional bottom feed; zero tear off distance; paper out/paper
jam detection; fan fold, continuous forms, edged punched.
Paper width: 2.5 to 8.5 inches.
Paper Slew Rate: 6 inches per second rear feed, 6 or 12 inches per second
bottom feed.
RIBBON
15,000,000 character, mobius loop cartridge.
SPECIAL FORMS HANDLING FEATURES
Print up to five part forms (.025" maximum thickness) (Nine part forms for
“si” models
Easy access to tractors.
Front panel and host form selection.
Automatic head gap.
Paper out sensing.
Paper motion sensing.
Page reprint.
Automatic path switching for same form in more than one path (with
optional bottom feed unit).
Nonvolatile memory for ten form setups. Parameters for each form include:
custom form name, tractor path (only with optional bottom feed unit), cpi,
left margin, right margin, lpi, form length, top margin, bottom margin, font,
character impact mode, language*, slashed or nonslashed zero, and
unidirectional printing.
COMPUTER INTERFACES
Centronics compatible Parallel.
Asynchronous RS-232: 110 to 9,600 baud; Even, Odd, or No parity; 7 or
8 data bits; 1 or 2 stop bits; XON/XOFF, ETX/ACK, and Hardware
handshake.
Optional 10/100 BaseT Ethernet Interface