Philips FET941D - Manual

TV
AUDIO IN
VIDEO IN
This portable DVD player is designed with a
built-in lithium battery to supply power to the
player when you are on travel.
1 Slide the POWER switch to the OFF position
(charging of the DVD player only possible in
the power-off mode).
2 Connect the supplied power adaptor cord (or
the car adaptor) to the player and AC mains
(or the car cigarette lighter outlet) to start
charging.
➜ The CHR indicator turns red.
➜ When the battery is fully charged, the
indicator turns off.
3 Disconnect the power adaptor cord (or the
car adaptor) when the CHR indicator turns off.
Note:
– You can also connect the supplied power adaptor
cord (or the car adaptor) to the player and AC
mains (or the car cigarette lighter outlet) directly
wherever possible.
Charge your battery 1
Quick start guide
Philips Portable DVD Player PET941D
1 Open the lid of the player.
2 Slide the POWER switch to ON to switch on
the DVD player.
➜ The
indicator turns on.
3 Slide OPEN 2 on the player.
4 Remove the protective card (if any) and load a
disc with the label side facing up.
5 Close the disc door.
➜ Playback will start automatically. If not, press
2;.
6 To stop playback, press 9.
2 Enjoy (Disc operation)
Note:
During play, you can:
– Press OPTION to select some play options: audio,
subtitle, repeat, and time display.
– Press directly to adjust brightness of screen
backlight to match lighting conditions.
2 Enjoy (AV OUT)
Connecting additional equipment (TV for
example)
1 Connect the AV OUT socket on the set to the
video and audio sockets on a TV as shown
directly.
2 Switch on the TV and set to the correct video-
in channel.
➜ You can consult the owner's manual of your
TV. (If your TV does not have Audio and
Video inputs, you will need to purchase a
RF modulator. Please consult your dealer.)
PET941D_37_QSG_V1.0 WK0919
White
Red
Yellow
Not supplied
PET941D_37_Eng_QSG.qxd 5/8/09 18:07 Page 1