POSIFLEX Business Machines Mustek Magnetic Stripe Reader MR2000U-3 - Manual (Page 3)

MR2000 Series User’s Manual p. - 3
l Card data format
Data standard IATA ABA THRIFT JIS I JIS II
Track used Track 1 Track 2 Track 3 (Track 2)
Rear
side
Applicable to
models
MR2000-2/3
MR2000S-2/3
MR2000U-2/3
MR2000-3
MR2000S-3
MR2000U-3
MR2000-JIS
MR2000U-JIS
Recording method F
2
F (FM)
Recording density 210 BPI 75 BPI 210 BPI 75 BPI 210 BPI
Recording capacity
characters / bits
79 / 7 40 / 5 107 / 5 40 / 5 72 / 7
Note: Data format for track 3 of ISO cards includes those specific in
AAMVA and CA DMV standards
l Adjustable parameters:
ü For MR2000-2/3 and MR2000S-2/3:
Changing the status of each selector in the 2 dotted areas that are the
enlarged images of the shaded areas on the control PCB determines parameters
illustrated in following 2 tables. (S1 ~ S6 apply to MR2000S-2/3 only) (T3
applies to MR2000-3 and MR2000S-3 only) (for MR2000–2/3, software control
is applicable and available)
Table 1
SELECTION &
FUNCTION
PARITY
CHECK
PARITY
DATA
BITS
ALT +
NUM
LEADING &
STOP CODE
TRACK 1 TRACK 2 TRACK 3
STATUS
S4 S5 S6 S7 S9 T1 T2 T3
SHORT OFF EVEN 7 NO OFF ENABLED ENABLED ENABLED
OPEN ON ODD 8 YES ON DISABLED DISABLED DISABLED
DEFAULT SHORT OPEN OPEN SHORT OPEN SHORT SHORT SHORT
Table 2
BPS
DEFAULT 19200 9600 4800 2400 1200 600 300 150
SELECT
ON S1 OFF ON OFF ON OFF ON OFF ON
OFF S2 OFF OFF ON ON OFF OFF ON ON
OFF S3 OFF OFF OFF OFF ON ON ON ON
S9 T2 T1
T3
C17
SH10
R5
SH1
OP4
R6
J2 J4 U3
U4 U2 U1
X1
LOCATIONS OF SELECTORS
on PCB inside die cast case
S8 S6 S2 S4 S7 S5 S3 S1