Philips 686 - Manual (Page 7)

Autoinstall
The video recorder will search for all TV channels. It stores TV
channels found in the following sequence: BBC 1, BBC 2, ITV,
CH 4, CH 5, SKY, others.
1 Switch on the TV set. Press the AUTOINSTALL button on
the video recorder. If TV channels have already been
stored, select the line ’AUTOINSTALL’, using the
P q or
P r button.
2 Confirm with the OK button.
’AUTOINSTALL’ starts. On the TV screen appears:
AUTOINSTALL 00
Wait until all TV channels have been found. This can take
several minutes.
3 When ’AUTOINSTALL’ is complete, ’READY’ will appear in
the display. Date and clock information have been set.
How to search for a TV channel manually, you can read in
chapter 4 ’SPECIAL FEATURES’, ’Manual channel search’.
Note:
With the
OK button you can interrupt the automatic chan-
nel search. All TV channels found will remain stored.
* If a TV channel transmits a ’TV channel identification’ (e.g.
’BBC1’), it appears in the display.
Setting the clock
If the time in the video recorder display is not correct or if
’--:--’ appears in the display, please set the clock manually.
1 Switch on the TV set.
2 Press the AUTOINSTALL button on the video recorder.
3 Confirm the line ’CLOCK’ with the OK button.
4 Adjust ’TIME’, ’YEAR’, ’MONTH’, ’DATE’ if required, using
the
P q or P r button or the digit buttons 0-9 .
TIME 20:00
YEAR 1998
MONTH 01
DATE 01
------------------------
-/+ OK
5 Confirm each entry with the OK button.
Note: If a TV channel which transmits TXT/PDC is stored
with programme number ’P 01’, time (from TXT) and date
(from PDC) will automatically be taken from the TXT/PDC
information.
5