Panasonic KX-TS730AZ - Manual (Page 11)

Making/Answering Calls
11
Making calls
1
Press {s}.
L
IN USE indicators will light in green.
2
Dial the phone number.
3
When finished talking, press {s}.
Note:
L
At the beginning of a call, both parties
should speak alternately. This enables
the unit to adapt to its environment and
let both parties speak effectively.
L
If the other party has difficulty hearing
you, press {<} to decrease the speaker
volume.
L
Use the unit in a quiet room.
To adjust the speaker volume
Press {<} or {>} repeatedly during a
conversation. 16 levels (high to low) are
available. “Receiver volume” is
displayed.
To dial after confirming the entered
number
1
Enter the phone number.
L
To correct a digit, press {CLEAR}.
Enter the correct number.
L
If a pause is required when dialling,
press {PAUSE} where needed.
L
To cancel, press and hold {CLEAR}
until the entered phone number
disappears.
2
Press {s} or {CALL} ({F1} key).
3
When finished talking, press {s} to
hang up.
To redial the last number dialled
1
Press {s}.
2
Press {REDIAL}.
To make a call using the redial list
The last 10 phone numbers dialled are
stored in the redial list.
1
Press {REDIAL}.
L
The last number dialled will be
displayed.
2
Press {<} or {>} repeatedly to display
the desired number.
OR
Press {REDIAL} repeatedly to display
the desired number.
L
To delete the displayed item, press
{
ERASE} ({F1} key).
L
To exit the list, press {STOP}.
3
Press {s} or {CALL} ({F3} key).
PAUSE button (for PBX/long
distance service users)
A pause is sometimes required when
making calls using a PBX or long distance
service.
For example, if you need to dial the line
access number “9” when making outside
calls with a PBX:
1
Press {9}.
2
Press {PAUSE}, then dial the phone
number.
3
Press {s} or {CALL} ({F1} key).
Note:
L
A 3.5 second pause is inserted each
time {PAUSE} is pressed. Press
repeatedly to insert longer pauses.
{
REDIAL}
{
PAUSE}
{s}
{
MUTE}
{
CLEAR}
{<}
{>}
Speaker
{
RECALL}
TS730AZ.book 11 ページ ２００５年１１月９日 水曜日 午後４時３４分