Plinius Audio Odeon Power Amplifier - Manual (Page 9)

7 MULTICHANNEL AMPLIFIER
Front Panel Functions
The front of the Plinius Odeon Multichannel Amplifier incorporates all the facilities you
will require on a daily basis.
1. DISPLAY LED
An LED on the front panel indicates the mode of operation. When first switched on
the unit will go into standby and the LED will vary in brightness. When the unit is taken
out of standby the LED will flash for a short time as part of the initialisation sequence,
then remain lit. LEDs in the lid of the Odeon will also light to show how many modules
are fitted and operating correctly.
2. STANDBY BUTTON
Pressing this button toggles between operate and standby modes. On exiting standby
the power LED will flash for a short time as part of the initialisation sequence, then
remain lit and the incoming signal will be amplified. In standby mode the power LED
will vary in brightness.
1
2