Philips DVP3100V/19 - Manual (Page 13)

English
Before Operation - VCR part
13
Setting the clock Manually
The clock in your DVD+VCR controls time and date
settings for your DVD+VCR.
The clock is set automatically during ACMS (Automatic
Channel Memory System) when you DVD+VCR detects a
channel that broadcasts a Teletext signal. If the broadcast
signal is weak the clock will not be set and will require
setting manually.
1 Press SYSTEM MENU.
Press b or B to select SET.
Press OK.
The auto adjust mode can be set to ‘OFF’ by pressing
OK if you want to set the time manually.
2 Use 3 or 4 on the remote control to alter the
HOURS, MINUTES, DAY, MONTH and YEAR.
Please note your DVD+VCR uses a 24 hour clock. e.g.
1pm will be displayed as 13:00.
The day of the week will appear automatically when you
enter the year.
3 If you make a mistake press b b or B B and enter the
correct details.
4 Press SYSTEM MENU.
To set the colour system
1 Press SYSTEM MENU.
2 The main menu will appear on the TV screen.
3 Press 1 or 2 to select the SYS and press OK.
4 Press 3 or 4 to select according to the COLOUR
system used.
5 Press SYSTEM MENU to remove the menus from the
TV screen.
REC
i
Pr-12
ACMS PSET
R
1 2
SET
SYS
SYS
OSD
ON
OFF
OSD f NIC
DECO-
DER
+ -
AUD
AUTO
PAL
SECAM
MESECAM
HH MM DD MM YY
: . . 00 1 01 06 SUN
1 2
SET
8
ACSS : OFF
i OK
HH MM DD MM YY
: . . - - - - - - - - - - - - -
ACSS : ON
i
1 2
SET OK