Specifications, Part names and functions appearance distributed by – Panasonic WV-CW480 User Manual
Page 2

• All TV pictures/menu are simulated.
• Weights and dimensions are approximate.
• Specifications are subject to change without notice.
• These products may be subject to export control regulations.
• Product pictures shown in this catalog are all NTSC models.
Specifications
TV System
NTSC
PAL
Type
WV-CW484S: Surface mount type WV-CW480S: Surface mount type
WV-CW484F: Flush mount type
Camera
Image Sensor
1/3-type interline transfer CCD
Effective Pixels
768 (H) x 494 (V)
752 (H) x 582 (V)
Scanning Mode
2:1 interlace scan
Scanning Area
4.8 (H) x 3.6 (V) mm
Scanning Frequency
Horizontal: 15.734 kHz
Horizontal: 15.625 kHz
Vertical: 59.94 Hz
Vertical: 50.00 Hz
Scanning Line
525 lines
625 lines
Horizontal Resolution
540 TV lines typical at color high mode,
480 TV lines at color normal mode, 570 TV lines at B/W mode
Minimum Illumination
Color (30IRE):
Color (30IRE):
1.5 lux (SENS UP: OFF),
0.6 lux (SENS UP: OFF),
0.15 lux (SENS UP: 10x) at F1.4 0.06 lux (SENS UP: 10x) at F1.4
B/W (10IRE):
B/W (10IRE):
0.16 lux (SENS UP: OFF),
0.08 lux (SENS UP: OFF),
0.016 lux (SENS UP: 10x) at F1.4
0.008 lux (SENS UP: 10x) at F1.4
Will be same as PAL spec with
WV-CW4C optional clear dome cover
Signal-to-Noise Ratio
50 dB (AGC Off, Weight On)
White Balance
ATW1, ATW2, or AWC
Light Control
ALC / ELC (only when monitor output is used)
AGC
ON (HIGH / MID / LOW), or OFF
Super Dynamic III
ON or OFF (with BLC masking 8 x 6 areas)
Dynamic Range
52 dB typical (Super Dynamic III ON) 54 dB typical (Super Dynamic III ON)
Electronic Shutter
OFF (1/60), 1/100, 1/250, 1/500, OFF (1/50), 1/120, 1/250, 1/500,
1/1,000, 1/2,000, 1/4,000, 1/10,000 s 1/1,000, 1/2,000, 1/4,000, 1/10,000 s
Electronic Sensitivity UP OFF / AUTO (2x, 4x, 6x, 10x) / FIX (2x, 4x, 6x, 10x, 16x, 32x)
Digital Noise Reduction High / Low
Resolution Mode
Normal / High
Black and White Mode
Mode: AUTO1 / AUTO2 / ON / OFF,
Level: High / Low, with external control
Digital Zoom
2x
Video Motion Detection
OFF / Mode1 (VMD) / Mode2 (Scene change), Sensitivity 256 steps, Mask 8 x 6 areas
Scene Change Detaction Yes, Included in VMD Mode2
Privacy Zone
ON (Gray / Mosaic) or OFF
Auto Image Stabilizer
ON or OFF
Camera Title
Up to 16 characters
Lens Mount
CS-mount
Back Focus Adjustment ABF, MANUAL, AUTO / PRESET / FIX
Synchronization
Internal (INT), Multiplexed Vertical Drive (VD2), Line-Lock (LL)
Lens
Focal Length
3.8 ~ 8.0 mm, 2x varifocal
Angular Field of View
H: 35.6
° (TELE) ~ 73.6° (WIDE) V: 26.6° (TELE) ~ 53.4° (WIDE)
Maximum Aperture Ratio 1:1.4 (WIDE) 1:1.8 (Tele)
Focusing Range
1.2 m (3.9 ft.) ~
∞
Pan and
Panning Range
±175°
Tilt
Tilting Range
±75°
Input /
Video Output
1.0 V [p-p] / NTSC composite 75
Ω / 1.0 V [p-p] / PAL composite 75 Ω /
Output
BNC Connector Multiplexed VD2
BNC Connector Multiplexed VD2
and control data capable
and control data capable
Monitor Output
1.0 V [p-p] / 75
Ω /
1.0 V [p-p] / 75
Ω /
NTSC composite signal /
PAL composite signal /
ø3.5 mm mini jack
ø3.5 mm mini jack
General
Setup Method
OSD setup menu
Language
English, Russian (For setup menu and camera ID), German,
French, Italian, Spanish (For setup menu), Chinese,
Japanese (For camera title. Setup menu will be English.)
Safety/EMC Standard
UL (6500 Edition2),
CE (EN60065, EN55022,
FCC (Part15 ClassA),
EN55024, ClassB),
C-UL (E60065),
GOST (R 51558).
DOC (ICES003 ClassA)
Power Source and
24 V AC 60 Hz, 4.1 W, 11 W*,
WV-CW480S:
Power Consumption
12 V DC 340 mA**
220 V ~ 240 V AC 50 Hz,
7 W, 13 W*
WV-CW484F:
24 V AC 50 Hz, 4.1 W, 11 W*,
12 V DC 340 mA**
Ambient Operating
–10
°C ~ +50 °C (14 °F ~ 122 °F),
Temperature
–30
°C ~ +50 °C (–22 °F ~ 122 °F)*
Ambient Operating Humidity 90 % or less (without condensation)
Water and Dust Resistance IP66, IEC60529 measurement standard compatible.
Dimensions
WV-CW484S:
WV-CW480S:
ø158.3 mm x 146.2 mm
ø160 mm x 161.7 mm
(ø6-1/4" x 5-3/4")
(ø6-5/16" x 6-3/8")
WV-CW484F: ø154 mm x 141.2 mm (ø6-1/16" x 5-9/16")
Weight (approx.)
WV-CW484S: 1.9 kg (4.18 lbs.) WV-CW480S: 2.1 kg (4.62 lbs.)
WV-CW484F: 1.4 kg (3.08 lbs.)
Part Names and Functions
Appearance
DISTRIBUTED BY:
WV-CW484S
(Surface mount type)
WV-CW480S
WV-CW484F
(Flush mount type)
Unit: mm (inches)
Above figures are for NTSC model.
Figures for PAL model are slightly different.
http://panasonic.co.jp/pss/cctv/en/
Printed in Japan (2A-011AL)
Power Cable (WV-CW480S, 220 ~ 240 V AC)
Power Cable (WV-CW484F, 24 V AC or 12 V DC)
Video Output Cable with BNC Connector
Enclosure
Focus Lock Lever
Zoom Lock Lever
Tilting Lock Screw
Azimuth
Panning Table
Panning Lock Screw
Camera Lock Screw
Monitor Output Jack
Optional Heater Connector
LED Indicator
Operation Buttons
SET Button
DOWN Button
UP Button
LEFT Button
RIGHT Button
109.7(4-5/16")
57.2
(2-1/4")
52.5
(2-1/16")
84.85(3-5/16")
84.85(3-5/16")
WV-CW484S: 36.5(1-7/16")
WV-CW480S: 52(2-1/16")
WV-CW484S: 225(8-7/8")
WV-CW480S: 425(16-3/4")
WV-CW484S: 260(10-1/4")
WV-CW480S: 1,835(72-1/4")
WV-CW484S: 146.2(5-3/4")
WV-CW480S: 161.7(6-3/8")
0.5(1/32")
0.5
(1/32")
ш105.3(ш4-1/8")
WV
-CW484S:
ш158.3(ш6-1/4")
WV
-CW480S:
ш160(ш6-5/16")
225(8-7/8")
141.2(5-9/16")
ш105.3(ш4-1/8")
ш154(ш6-1/16")
ш81(ш3-3/16")
52.5
(2-1/16")
57.2
(2-1/4")
109.7
(4-5/16")
31.5
(1-1/4")
0.5(1/32")
33.1(1-5/16")
83.5(3-5/16")
260(10-1/4")
33.1(1-5/16")
46
(1-13/16")
46(1-13/16")
92(3-5/8")
4-Mounting Surface
4-ø4.8 Attachment Bore
77(3-1/16")
Important
– Safety Precaution: carefully read the operating instructions and installation manual before using this product.
* With optional Heater Unit WV-CW4H
** Optional Heater Unit WV-CW4H cannot be used under 12 V DC operation