Philips 14PV225/07 - Manual (Page 6)

6
EN
Preparation for use
1. 1. After you have connected the aerial or cable,
confirm the picture on the TV screen with
.
2. 2. The automatic TV channel search starts.
When automatic TV channel search is com-
plete,'AUTO TUNING COMPLETE' will appear
on the TV screen.
<14PV 225>
3. 3. 'TIME' and 'DATE' will appear on the TV
screen.
4. 4. Check 'TIME'. If required, please change the
time with the number buttons .
5. 5. Check if the displayed settings for 'DAY',
'MONTH' and 'YEAR' are correct.
6. 6. When all information is correct, save by
pressing .
The preparation for use is now complete.
Decoder allocation
Some TV channels transmit encoded TV signals
which can only be viewed with a commercially
purchased or hired decoder without distur-
bances. You can connect such a decoder to this
TV-Video Combi. The following function will auto-
matically activate the connected decoder for the
desired TV channel.
1. 1. Use , or to select the
TV channel which you would like to allocate
the decoder to.
2. 2. Press . The main menu will appear.
3. 3. Use to select 'TUNER
SET UP'. Then press .
4. 4. Use to select 'MANUAL
TUNING'. Then press .
5. 5. Use to select
'DECODER'.
6. 6. Use to select 'ON'
(Decoder switched on).
7. 7. To end, press .
The decoder has now been allocated to this TV
channel.
STATUS/EXIT
FWD 1 - B
STOP C - L PLAY B - K
FWD 1 - B
STOP C - L PLAY B - K
FWD 1 - B
STOP C - L PLAY B - K
MENU
0..9 PROG P– PROG P+
STATUS/EXIT
0..9
PROG P+
3. Installing your TV-Video Combi
PLEASE WAIT
START FINISH
❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚
❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚
TIME --:--
DATE --/--/--
SMART CLOCK [ON]
END=EXIT
MANUAL TUNING
PROG. P55
CHANNEL 055
→ DECODER [OFF]
SKIP [OFF]
SELECT K L CHOOSE B
END=EXIT
How can I switch off the decoder?
Use
to select 'OFF' (Decoder
switched off).
FWD 1 - B
Connecting additional devices
After you have connected additional devices
(satellite receiver, etc.) through the aerial cable,
switch them on. The automatic channel search
will recognise them and save them.
Satellite receiver
If you are connecting a satellite receiver, please
read the section 'Using the satellite receiver'.
Decoder
If you are connecting a decoder, you must
install it as described in the next section.
T6410EZ(UK).qx3 03.3.22 14:08 Page 6