Philips 15PF9925/12S - Manual (Page 5)

Preparation
Please, make sure to connect the
power plug to the wall outlet socket
after connecting the TV to the
adapter!
&
Place the TV on a solid surface.
Ensure that the TV is placed in a position to
allow free flow of air. Do not cover the
ventilation openings on the back cover.
To prevent any unsafe situations, no naked
flame sources, such as lighted candles,
should be placed on or in the vicinity.
Avoid heat, direct sunlight and exposure to
rain or water.The equipment shall not be
exposed to dripping or splashing.
é
Insert the aerial plug firmly into the
aerial socket
ANT IN
x 75 Ω at the back
of the TV.
“
To connect your computer, see Connect
peripheral equipment, Personal computer,
p 15.To connect other peripherals,
see p. 12.
1m
min.
x 75
ANT IN
CABLE
‘
Remote control: Remove the cover of the
battery compartment. Insert the 2 batteries
supplied (Type R6-LR6 1.5V).
(
Power:This TV operates on a DC supply
provided by the AC-DC adapter.The
voltage is as indicated on the label on the
back cover.
Only use the AC-DC adapter supplied with
the TV and never apply an AC power cord
to the TV directly.The AC-DC adapter
operates on an AC power supply, the
voltage is as indicated on the label of the
AC-DC adapter.
Connect the DC plug of the AC-DC
adapter to the DC 12V socket at the back
of the TV. Connect the AC-DC adapter and
its power cord.
Insert the power cord in the wall socket
having a AC power supply of 110V.
§
Turn the TV on: Press the power button
at the front side of the TV to turn it on or
off.
If the TV is in standby mode, the standby
indicator in front of the TV illuminates brightly.
Press the B button on the remote control or
the – CH + button or one of the digit buttons
to turn the TV on.
See p. 7 to memorize the channels available
in your local broadcast area.
R6-LR6 / 1,5 V
4
Preparation
DC 12V
_
+
268E(15") en 1997/04/03 9:24 AM Page 4