PYLE Audio Cantilever Bracket PSW115 - Manual (Page 2)

-2- -7-
A-G K H J I L
Hardware List: Hardware List:
4 I
J
K
L
4
4
4
Square washer
Long bolt
Wall anchor
Long bolt washer
9/16 Spacer
"
ID Description
1
2
A
3
B
C
1
1 4
1
4
4
Wall mount
Left bracket
Right bracket
M4 mm ×12 bolt
M mm 5×12 bolt
M × mm 6 12 bolt
M × mm 4 25 bolt
M × mm 5 25 bolt
M6× mm 25 bolt
Qty
D 4
4
4
4
4
E
F
G
H
4 2 Safe bolt
1/4 -20×5/8 bolt " "
ID Description Qty
1
2 3
4
Warning: Some TV require two people to lift, as we are not responsible for any
personal injur y or product damage due to mishandling. Warning:
Fig 3a Fig 3b
Step 3: Hanging display
Firstly lift the bracket mounted display over the wall mount. And then hook the
brackets over the top of the wall mount. Rotate the display let the bottom of the
brackets hook over the bottom of wall mount, as shown in Fig.3a. Then put safe
bolts into the bottom of the brackets and lock it, as shown in Fig.3b.
Step 3: Hanging display
Fig 2b Fig 2c
Brick, Concrete and Stone wall:
Using the wall mount as template to mark 4 holes location on the wall. Pre-drill
these holes with a 10mm drill bit to at least 80mm deep hole. Insert wall anchors(J)
into each of these holes. Attach the wall mount to the wall using 4 long bolts(I) and
washers(K).
Brick, Concrete and Stone wall:
K I
1
2,3
4