Palsonic 7128G User Manual
Page 24
.
.
.
.
.
.
.
.
.
.
.
.
X~Z+2, S1~S41
737 (W) x 610 (H) x 519 (D)
140W
Dimensions (mm):
Weight (kg):
PAL-B/G
OTHERS
Troubleshooting Guide
Before calling service personnel, please check the following chart for a possible cause to the
trouble you are experiencing.
Spots appear on the screen
Stripes appear on the screen
Double images or "ghosts"
Snowy picture
The remote controller does not work
TV cabinet creaks
Specifications
Power supply:
Power consumption:
CRT
TV system & channel range
System
VHF
UHF
Be sure the power cord is plugged in.
Contrast, colour, tint are not correctly
adjusted
Possible interferences of automobiles,
motorcycle, trolley bus, neon lamps, etc.
Possible interference of electronic
interference from another TV set, a
computer, an electronics game machine, a
broadcast station, etc.
This may be caused by reflections from
nearby mountains or buildings.
Check the antenna direction.
It is possible that the aerial “lead-in” is
damaged or comes off.
Check the antenna direction
The batteries may be worn out.
The batteries may be installed with their
polarity reversed.
Even if the picture or the sound is normal,
changes in the room temperature
sometimes make the TV cabinet expand or
contract, making a noise. This does not
indicate a malfunction.
AC 240V, 50Hz
45
71cm
CATV
2-12
21-69
Colour system:
PAL-BG, NTSC 3.58/4.43 (AV)
Sound output:
5W + 5W
Accessory:
one remote controller
* Note: Design and specifications are subject to change without notice.
Poor colour, poor tint
No power, red indicator is not lit up
Symptoms
Check the following items
22