Cleaning instructions – Planar VitalScreen VSS15X-TR User Manual
Page 7
15" VitalScreen S
vii
QUICK LINKS
GETTING STARTED
INSTALLING THE DISPLAY
USING THE CONTROLS
APPENDIXES
Cleaning instructions
Use only the products listed below for cleaning the display. The products differ for cleaning
the screen and cleaning the plastic enclosure. Be sure you use only the specific products
approved for either the screen or the enclosure.
Always apply the product to a clean nonabrasive cloth and then wipe the screen or plastic
enclosure. Cleaners applied directly to the display could leak inside a non-sealed unit and
cause damage. Be careful not to splash solvents on the screen or enclosure.
To clean the screen
1
Switch the power off.
2
Dampen a clean nonabrasive cloth with 70 percent isopropyl alcohol.
3
Wipe the screen gently with the dampened cloth.
4
Dry the screen with a clean nonabrasive cloth to remove any residue.
To clean the enclosure
1
Switch the power off.
2
Dampen a clean nonabrasive cloth with 70 percent isopropyl alcohol, or another
recommended product.
3
Wipe the enclosure gently with the dampened cloth.
4
Dry the enclosure with a clean nonabrasive cloth to remove any residue.
Recommended for screen
Use 70 percent isopropyl alcohol.
This is the only cleaning solution
approved for use on the non-touch
screen (model VSS15X) and the
touch screen (model VSS15X-TR).
Do not use water or solvents (such as
ketone, acetone) and aromatics
(such as xylene, toluene).
Recommended for enclosure
You may also use 70% isopropyl
alcohol to clean the plastic
enclosure. Otherwise, use only
the following products to clean
the enclosure.
• Cidex®
• Clorox Clean-Up®
• “Green soap” United States
Pharmacopoeia (USP)
• Formula 409®
• Sani-Cloth® Plus
• Virustat TBQ™
Do not use these products on
the screen.