Pioneer DVR-630H-S - Manual (Page 89)

The Video/Audio Adjust menu 12
89
En
Chapter 12
The Video/Audio Adjust menu
Setting the picture quality for TV and
external inputs
Picture Creation lets you choose a set of picture quality
settings for the built-in TV tuner and for each external
input. There are several preset settings that suit various
sources, or you can create up to three of your own sets.
Choosing a preset
1 With the recorder stopped, press HOME MENU
and select ‘Video/Audio Adjust’.
2 Select ‘Video Adjust’.
3 Use the / buttons to change the preset.
• Use the INPUT SELECT button to switch between the
built-in TV tuner and the external inputs.
• Use the CH +/– buttons to change the channel of the
built-in TV tuner.
There are six presets available:
• Tuner – suitable for general TV broadcasts
• VCR – suitable for video cassettes
• LDP – suitable for Laserdiscs
• Memory1 – user preset 1
• Memory2 – user preset 2
• Memory3 – user preset 3
You can press DISPLAY to see the individual settings for
the current preset ( Tuner , VCR or LDP ).
4 Press ENTER to select the preset.
Creating your own set
There are three user presets in which you can save your
own set of picture quality settings.
1 Follow Choosing a preset above and select one of
the user presets (Memory 1, 2 or 3).
2 Select ‘Detailed Settings’.
3 Use the / buttons to select the picture quality
setting you want to adjust.
You can adjust the following settings:
1
• Prog. Motion – Adjusts the motion and still picture
quality when video output is set to progressive.
• PureCinema – This setting optimizes the picture for
film material when the video output is set to
progressive. Usually this is best left set to
Auto ; try
switching to Off if the picture appears unnatural.
• 3-D Y/C – Adjusts the brightness/color separation
(NTSC video only).
• YNR – Adjusts the amount of noise reduction (NR)
applied to the Y (brightness) component.
• CNR – Adjusts the amount of noise reduction (NR)
applied to the C (color) component.
• Detail – Adjusts how sharp edges appear.
• White AGC – Turn on for automatic white level
adjustment.
2
• White Level – Adjusts the intensity of white.
• Black Level – Adjusts the intensity of black.
• Black Setup – Corrects the standard reference black
level (NTSC video input only).
Timer Recording
Photo Viewer
Disc Setup
Play Mode
Disc Navigator
Initial Setup
Video/Audio Adjust
Copy
Jukebox
Detailed Settings
Pr 1
Tuner
Note
1.When the DV input is selected, only Prog. Motion and PureCinema settings can be adjusted.
2.When White AGC is On , the White Level setting can’t be adjusted.
Detailed Settings
Pr 1
Memory1
Memory1
3D-Y/C
CNR
YNR
Motion Still
Motion Still
Detail
PureCinma
Prog. Motion
White AGC
Auto
Off
Max
Max
Off
Off
Min
Max
Pr 1
DVR630HS_RL.book 89 ページ ２００５年３月１８日 金曜日 午前９時４９分