Panasonic CQ-C300U - Manual (Page 18)

CQ-C300U
18
MP3/WMA Player
4
Select a desired portion.
Folder Selection
[] (FOLDER): Next folder
[] (FOLDER): Preceding folder
File Selection
[] (TRACK): Next file
[] (TRACK): Preceding file (press twice)
Note: Hold down for fast forward/reverse.
Pause
Press [].
Press again to cancel.
Operation Flow
MP3/WMA
Mode Display
Folder number File number
Play Mode indicators
Lights when each mode is activated.
Random play
Repeat play
Folder Random, Folder
Repeat, Folder Scan
Lights when the disc is loaded.
*ID3/WMA Tag Setting
When a disc is already loaded, press [SOURCE] to
select the MP3/WMA mode.
1
Press [OPEN] to open the face plate.
2
Load a disc with the printed side facing up.
Note: It may take some time to start playing.
3
Close the face plate manually.
Notes:
• The unit recognizes the disc and starts playing
automatically.
• The power will be turned on automatically when a disc
is loaded.
Disc Eject
1 Press [OPEN].
2 Press [] and take the disc out.
3 Close the face plate manually.
Cautions
• This unit does not support 8 cm {3"} discs.
• Do not insert a disc when
indicator lights
because a disc is already loaded.
• Do not use irregularly shaped discs. (  page 28)
• Do not use discs that have a seal or label attached.
• To avoid damaging the face plate, do not push it down or
place objects on it while it is open.
• Do not pinch your finger or hand in the face plate.
• Do not insert foreign matter into the disc slots.
• Refer to the section on “Notes on CD/CD Media (CD-ROM,
CD-R, CD-RW)” (  page 28).
• A disc which has both CD-DA data and MP3/WMA data on it
may not be reproduced normally.
• Refer to the section on “Notes on MP3/WMA” (  page 20).
Hold down [3] (SCROLL) for 2 sec. or
more.
(Default)
When a folder name is displayed:
TAG ON: The album title is displayed.
TAG OFF: The folder name is displayed.
When a file name is displayed:
TAG ON: The title/artist name is displayed.
TAG OFF: The file name is displayed.
[] (Eject)
Printed side