PYLE Audio PMX801 - Manual (Page 10)

10
Using by this jack, you can use stereo 1/4 ＂ jacks connector send internal signal which before power
amplifier to external effects processing, after processing return to internal power amplifier.
Or you can use stereo or mono 1/4
＂
jacks connector send external signal to inner power amplifier .
3. POWER SWITCH
when you want to operate, turn on it, then the LED will be turned on .
4. AC POWER CORD/FUSE HOLDERS
AC 220
～240V 60Hz or 110-120V 60Hz ,Check the power voltage of supply with silk-screen of the
panel before connections. When occur a problem on this appliance, the fuse will be cut off, power to
prevent form a problem.
5. FAN
In order to prevent rising the inside temperature, the inside heat is emitted outside.