Pioneer DEH-600BT - Manual (Page 30)

Clearing a phone book entry
1 Display the phone number list of your
desired phone book entry.
See step 1 to 5 on Calling a number in the
phone book on page 28 for how to do this.
2 Press and hold MULTI-CONTROL to dis-
play the edit screen.
3 Turn MULTI-CONTROL to display
CLR MEMO (clear memory screen).
Turning
MULTI-CONTROL switches input
screens in the following order:
EDIT NUMBER (number edit screen)
—
EDIT GENRE (genre edit screen) —CLR MEMO
(clear memory screen)
4 Push MULTI-CONTROL right to show a
confirmation display.
CLEAR MEMORY YES is displayed.
# If you do not want to clear the memory that
you have selected, push
MULTI-CONTROL left.
The display reverts to normal.
5 Press MULTI-CONTROL to delete the
Phone Book entry.
The Phone Book entry is deleted and
CLEARED is displayed. The display returns to
Phone Book entry list.
Using preset numbers
Numbers that you dial frequently can be as-
signed to presets for quick recall.
Assigning preset numbers
1 Press LIST to display DIAL PRESET (pre-
set number list).
Refer to Using the phone number list on page
28.
2 Turn MULTI-CONTROL to switch preset
numbers.
You can select preset number from
1 to 10.
# Press and hold DISP to scroll the phone num-
ber.
# If the phone number is already in the phone
book, the corresponding name is displayed.
In this case, press and hold DISP to scroll the
name.
# You can also change the phone number by
pushing
MULTI-CONTROL up or down.
3 Press MULTI-CONTROL to select a preset
number that you want to assign a phone
number to.
4 Press and hold MULTI-CONTROL to dis-
play MEMORY.
Push
MULTI-CONTROL up or down to switch
MEMORY (memory) and DELETE (delete).
# If a phone number is already stored in the se-
lected preset number, the new phone number will
overwrite the old one.
# For details on deleting, refer to Deleting preset
numbers on the next page.
5 Select MEMORY and then press
MULTI-CONTROL to display the phone
book.
6 Turn MULTI-CONTROL to select the first
letter of the name you are looking for.
# You can also perform the same operation by
pushing
MULTI-CONTROL up or down.
7 Press MULTI-CONTROL to display en-
tries.
The display shows the first three Phone Book
entries starting with that letter (e.g.
“Ben”,
“Brian” and “Burt” when “B” is selected).
8 Turn MULTI-CONTROL to select a phone
book entry you want to store in the preset
list.
# You can also perform the same operation by
pushing
MULTI-CONTROL up or down.
# You can scroll literal information by pressing
and holding
DISP.
9 Press MULTI-CONTROL to display the
phone number list of the selected entry.
# You can also display the phone number list of
the selected entry by pushing
MULTI-CONTROL
right.
# If several phone numbers are included in an
entry, select one by turning
MULTI-CONTROL.
Operating this unit
En
30
Section
02