beautypg.com

Philips SCF280 User Manual

Page 11

background image

Frequently asked questions

This chapter lists the questions most frequently asked about the appliance. If you cannot find the

answer to your question, contact the Customer Care Centre in your country.

Question

Answer

Why does the indicator LED not

burn?

Check whether you have inserted the plug into a wall socket

properly.
Perhaps you try to run the appliance at the wrong voltage.

This appliance operates at mains voltages between 220 and

240 volts

Why does the indicator LED

blink red while the appliance

beeps?

Press the control knob to interrupt the process and check the

water level in the base. Refill the base if necessary.

Why does the base overflow?

You have poured too much water into the base. Stick to the

quantities mentioned in the temperature overview.

Why is the temperature of the

milk too low after heating up?

You have selected a too low setting for the quantity of milk

you want to warm. Switch on the appliance briefly again to

warm the milk to the required temperature. Select a higher

setting next time.

Why is the temperature of the

milk too high after heating up?

You have selected a too high setting for the quantity of milk

you want to warm or you left the bottle in the appliance too

long. Select a lower setting next time and/or remove the

bottle immediately after the process has ended.

Why are the contents of the jar

not warm enough after heating

up

Make sure the control knob has been set to n.

Stir the contents of the jar after heating up.
Perhaps you tried to heat a jar that contains more than 150g

baby food.

Why are vegetables/fruit still not

steamed properly after steaming?

You may have put too much in the steaming bowl. Decrease

the quantity of vegetables or fruit.
You may have selected a too short steaming time. Switch on

the appliance again to complete the steaming process.

Why does the food not defrost

properly?

Decrease the amount of food in the steaming bowl or select

a longer steaming time.

Why are there white spots in the

bowl, the container and/or the

steaming bowl?

These white spots are scale. To remove them, follow the

instructions in chapter ‘Descaling’.

EngliSh

11